PROTECTION AGAINST BREAKAGE AND SCRATCHES

BECAUSE LIFE IS AN ADVENTURE

Product Registration Warranty

Hiprotec Warranty

2 years warranty on display breaking

2 years warranty
Surface 7 times harder
Antibacterial
Fewer Fingerprints and Dirt
Low Wear
Degree of Hardness 9,9H
Product of highest Quality

REGISTRATION FOR ACTIVATION OF THE 2 YEAR GUARANTEE

For the product version "RED EDITION" with 2 years warranty on glass breakage (marked on the packaging):

Smartphones treated with HIPROTEC DISPLAY "RED EDITION" will have a 100 EUR money back guarantee if the display glass surface breaks within 2 years from the date of purchase, once the registration has been completed and confirmed.  The EUR 100 will be provided in the form of a virtual credit card

Click here to register your product.

Surface becomes 7 times harder than untreated display glass

Protection against Breakage and Scratches

HOW DOES THE HIPROTEC TECHNOLOGY WORK?

The surface sealing is completely invisible and prevents the breakage and wear of the treated glass surface. Following treatment, the mobile phone is exactly as usable as before and neither the haptics nor touchscreen ability is influenced. The colours of the display even appear more brilliant due to the change in the light refraction of the diamonds. Furthermore, the surface is protected against bacteria and can also be cleaned more easily.  The certified hardness was tested and confirmed by a renowned German institute for material testing (the test report can be submitted on request).

Antibacterial

Protection against bacteria and microbacteria

LESS FINGERPRINTS OR GREASE STAINS

Protection from humidity, grease, and sand

Low Wear

The surface ages more slowly

Degree of Hardness 9,9H

76% OF ALL MOBILE PHONE DAMAGES ARE DUE TO DISPLAY BREAKAGE

HIGH-QUALITY PRODUCT

Made in Switzerland

Patented Swiss quality product

Pure diamond protection

what makes hiprotec so special?

The patented HIPROTEC MICRO-DIAMOND-GEL seals the glass surface of your smartphone display 100% at the micro-particle level. The MICRO-DIAMANT-GEL penetrates to a depth of more than 85 μm and hardens the glass surface to the ultra-hard value of 9.9 H.

HIPROTEC DISPLAY connects 100% to the surface and penetrates into a depth of more than 85 μm. As a result, no additional layer forms above the glass, but a combined, ultra-hard unit. HIPROTEC DISPLAY is a patented Swiss quality product, tested by a renowned German institute for material testing (the test report can be submitted on request).

 

Hiprotec display

PROTECTION AGAINST BREAKAGE AND SCRATCHES

No matter if you’re running or sightseeing – Hiprotec protects your display in all kinds of situations. Take a look at our video to see how Hiprotec can enhance your everyday life.

Your Adventures

Philip & Nina, Backpacker

“When we’re travelling, it’s important that we can rely on our mobile phones. No matter if we’re on a trekking tour through Thailand or a city trip in Rome – things can get a bit rough on the road and you need a display you can count on.”

Diana, mother

“Simon is a little whirlwind. He’s not really gentle with his toys – and the same is true for my mobile phone if he gets his hands on it. Thanks to Hiprotec I don’t need to worry if he accidentally drops it.”

Heinz, brick layer

“A construction site is no playground. It’s hectic, dirty and loud – and my tablet needs to be able to live up to this challenge. With Hiprotec, it’s safe and ready to use amid construction machinery and concrete.”

Monika, gardener

“In summer, I spend most of my days outside. Soil, dirt, uneven ground – that’s all part of my daily job. Thanks to Hiprotec, it’s no problem if my mobile phone slips out of my pocket – just wipe it clean and you’re good to go!”  

Application

Step 1

turn off

Switch your device off, disconnect it from the power supply and disconnect peripheral gadgets such as headphones, etc. Avoid direct sunlight.

Step 2

Prepare

Use the cloth „PREPARE“ from sachet no. 1 to wipe off the display surface. Wait for 2 to 3 minutes after the cloth stops emitting any moisture. When the display surface appears cloudy and dry, proceed with step 3.

step 3

Clean

Rub the display surface evenly with the „CLEANER cloth“ from sachet no. 2 until it is completely clean, glossy and shows no residues of the PREPARER anymore. Also use the enclosed POLISH-FLEECE from sachet no. 4 or a soft paper towel (kitchen roll or tissue) to remove all smears and residues from the glass surface in order to remove all clouding and residues entirely.
Then continue with step 4 at once.

step 4

DIAMOND-GEL

Take sachet no. 3 with the DIAMOND-GEL and cut it open with scissors in the marked location. Squeeze the entire content centrally onto your smartphone display. Spread the GEL evenly and completely on the entire glass surface in circular movements with the enclosed sponge and make sure that you include all corners and edges. Wait for 10 to 13 minutes after this application until the GEL starts to shine a little (drying effect).

step 5

POLISH-FLEECE

Clean the coarse residue display with a soft paper towel (kitchen roll or paper towel). Polish the entire display in circular motions and with slight pressure with the enclosed POLISH-FLEECE cloth from sachet no. 4 until your display is glossy, free of smears and clouding and all gel residues have been removed from the joints.

step 6

READY TO USE

After this process, you can use your smartphone again at once.

It will take 72 hours before the surface has reached its final hardness!
Complete protection will only be achieved then.

Questions?

Hiprotec FAQs

How can I get warranty for my HIPROTEC DISPLAY product?

Here on the website! Just go to "Product Registration" or click here.

For your registration we need a photo (in the format: jpeg / pdf) from your switched-on smartphone display with IMEI displayed - where the entire smartphone front side is clearly recognizable. Here is an example photo. A screenshot is not suitable!

To see your IMEI, go to your phone’s system preferences or type *#06# and call.

 

Where can I buy HIPROTEC DISPLAY?

Available since January in Switzerland, Austria, Germany, Czech Republic, Slowakia, Hungary, Poland, Slovenia and Canada. More countries coming soon!

Where do I find the IMEI of my cellphone?

To see your IMEI, go to your phone’s system preferences or type *#06# and call.

In which case can my product registration be rejected?

  • wilful destruction
  • misapplication (read instruction carefully)
  • purchase is more than 4 weeks ago
Where do I find my serial number?

You can find the serial number in the inside of the packaging. 

How does the warranty procedure work?

After finishing the product registration you will get a warranty code via mail. Please report your warranty request here in case of damage with this number. Click here to see the warranty conditions.